Mytek-digital DIO MADI Card (ver. 1.4 / May 2011) User Manual

Mytek DIO MADI Card – User Manual Mytek DIO MADI CardUser Manual ver. 1.4 / May 2011© Mytek 2011www.mytekdigital.com Page: 1 / 24

Mytek DIO MADI Card – User Manual 9. Screw on the converter top cover.10. Connect power and signal lines.11. Turn the converter on. After boot up (whi

Mytek DIO MADI Card – User Manual Connecting Clock SignalIf the DIO MADI card is connected to a device that has no external input clock, the device sh

Mytek DIO MADI Card – User Manual DipSwitch configuration1,2,3 - channel position (transmitter and receiver)1 – OFF , 2 – OFF , 3 – OFF: channels 1 –

Mytek DIO MADI Card – User Manual MADI Card ConnectorsAll outputs of the DIO MADI card are simultaneous. 7 and 8 DipSwitch positions are used to selec

Mytek DIO MADI Card – User Manual 5th DipSwitch position is responsible for the selection frame type. At 44.1 and 48 kHz frame type 48k is used only.

Mytek DIO MADI Card – User Manual RME Madiface ExpressCardThe Mytek DIO MADI card can directly interface with RME's HDSPe Madiface ExpressCard.

Mytek DIO MADI Card – User Manual Long optical cable run with BNC converter chain MADI HostUsing optical cables to connect the main conve

Mytek DIO MADI Card – User Manual RME Madiface with BNC converter chain RME Madifacewww.mytekdigital.com Page: 17/24

Mytek DIO MADI Card – User Manual All BNC or optical connections MADI Host OutOpti

Mytek DIO MADI Card – User Manual Mainboard firmware updateWARNING!Remember to follow basic safety

Mytek DIO MADI Card – User Manual This manual may be updatedDownload the newest version at:http://www.mytekdigital.com/download_library/For technical

Mytek DIO MADI Card – User Manual 3. Locate the memory socket on the converter main board.4. Gently remove the old memory chip.To avoid damaging memor

Mytek DIO MADI Card – User Manual 5. Carefully insert new memory chip in the socket. The chip slot (pin1) should be matching the socket slot i.e. must

Mytek DIO MADI Card – User Manual 7. Attach power cord and other cabling.8. Turn on the converter.For about 2 seconds no LED should be lit on the conv

Mytek DIO MADI Card – User Manual Important Safety Instructions• Read these instructions. • Keep these instructions. • Heed all warnings. • Follow a

Mytek DIO MADI Card – User Manual WARNINGExcessive sound pressure from speakers and headphones can cause hearing loss. In order to use this product sa

Mytek DIO MADI Card – User Manual ContentIntroduction...4Before You Begin...

Mytek DIO MADI Card – User Manual IntroductionThe Mytek DIO MADI Card is a physical card that plugs into the back of the Mytek 8X192 ADDA converter.Wi

Mytek DIO MADI Card – User Manual Quick Start1. Installation of DIO MADI card Remove the top cover from the converter, unscrew the DIOCARD1 or DIOCARD

Mytek DIO MADI Card – User Manual Card InstallationThe DIO MADI card can be installed in either DIOCARD1 or DIOCARD2 slot. The card can be installed w

Mytek DIO MADI Card – User Manual 3. Remove the top cover.4. Locate the DIOCARD1 or DIOCARD2 expansion slot on the mainboard.www.mytekdigital.com Page

Mytek DIO MADI Card – User Manual 5. Unscrew the cover plate of the chosen slot from the rear panel.6. Partially insert the card from the back of the

Mytek DIO MADI Card – User Manual 7. Attach card ribbon cable to DIOCARD1 or DIOCARD2 connector on the mainboard.8. Gently push the card inside and se